Jumper Settings; Clear Cmos Data - DFI G5G100-P User Manual

Jumper Settings

Clear CMOS Data

If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the
ROM BIOS.
To load the default values stored in the ROM BIOS, please follow
the steps below.
1. Power-off the system and unplug the power cord.
2. Set J_CMOS1 pins 2 and 3 to On. Wait for a few seconds and
set J_CMOS1 back to its default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Hardware Installation
1-2 On: Normal
(default)
2-3 On:
J_CMOS1
Clear CMOS Data
2
1
2
3
1
2
3
23