Draining Water From Fuel Filter - Mitsubishi Fuso FK 2008 Owner's Manual

Mitsubishi fuso fk/fm series 2008 model trucks
Table of Contents

Advertisement

1. Apply the parking brake firmly.
Chock the wheels to prevent the vehicle from
moving.
2. Tilt the cab.
3. Wipe sand, dust and other impurities from the
cap
to prevent them from entering the system
when the cap is removed.
4. Turn the cap in the direction of the arrow
illustrated and remove it.
5. Pull the valve element
it.
Z17501
6. Replace the O-ring
one. Lightly coat the new O-ring with engine oil
before installing it onto the cap.
CAUTION
Be sure to use the O-ring supplied with the new
valve element.
7. Install the new valve element. Always use a
genuine part.
8. Install the cap, turning it by hand in the direction
of the arrow
slightly lifts up and comes to a stop.
CAUTION
Install the cap carefully so that the O-ring will
not be twisted and damaged.

Draining water from fuel filter

If the
warning lamp lights up, there is water in
the fuel filter in an amount exceeding the limit.
Drain the water as follows:
Z17345
straight up and remove
on the cap with a new
. Continue to turn the cap until it
12-45
P. 12-6
as

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents