Luxibel LX120 User Manual

Luxibel LX120 User Manual

Luxipix 7x7 led matrix

Advertisement

LX120
LUXIPIX 7X7 LED MATRIX
USER MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Luxibel LX120

  • Page 1 LX120 LUXIPIX 7X7 LED MATRIX USER MANUAL...
  • Page 2: Safety Instructions

    Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Luxibel ® ! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
  • Page 3 LX120  Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device.  All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
  • Page 4: Horizontal Alignment

    LX120  Refer to the ArKaos MediaMaster software manual for detailed instructions on programming this product (www.arkaospro.com). Art-Net  Art-Net is a communication system that allows DMX512 to be sent over Ethernet.  The Art-Net protocol was developed by the company Artistic Licence Engineering and has now been published into the public domain.
  • Page 5: Power Connections

    LX120 Connections Power connections  Have a qualified electrician carry out the electric connection.  Connect the device to the mains with the power plug. All devices must be powered directly off a grounded switched circuit.  Never connect the device to a rheostat or dimmer, even if the rheostat or dimmer channel is used solely for 0 % to 100 % switching.
  • Page 6: Using The Control Panel

    LX120 Using the Control Panel Access the control panel functions using the four panel buttons located near the display. Button Function <MENU> used to access the menu or to return to a previous menu option <UP> scrolls through the menu options in ascending order <DOWN>...
  • Page 7: Automatic Mode

    LX120 IP Mode Static Uses the device's preset IP address [Only used with Art-Net] DHCP IP address provided by router Manual Sets IP address manually 0-127 Only used with Art-Net Subnet 0-15 Only used with Art-Net Universe 0-15 Only used with Art-Net...
  • Page 8: Dmx Channel Values

    LX120 Start addresses Highest start Channel mode address First unit Second unit Third unit Start address 6 (1 + 5) 11 (6 + 5) Channel 1 - 5 6 - 10 11 - 15 Start address 50 (1 + 49)
  • Page 9: Cleaning And Maintenance

    LX120 54 channel mode channel function value percent/setting White1 000-255 0 - 100% White2 000-255 0 - 100% White3 000-255 0 - 100% White4 000-255 0 - 100% White5 000-255 0 - 100% White6 000-255 0 - 100% (etc) White45...
  • Page 10: Technical Specifications

    LX120  The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections…...
  • Page 11 Velleman® Service and Quality Warranty Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations.

Table of Contents