Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Luxibel ® ! Please read the manual thoroughly before bringing this device into service.
Keep this manual for future reference. Features The LXMH10002, a big brother to the LX201, is an innovating double-head LED beam with 7 high-power white 20 W LEDs. Enjoy the added power and create beautiful new effects with the two moving heads.
LXMH10002 Mounting and Connection Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket. Connect the power cord to the mains. Disconnect after use. Mounting the Device Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.
LXMH10002 DMX-512 Connection When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the other side to the male XLR input of the device. Multiple devices can be linked through serial linking.
Page 7
LXMH10002 Button Function scroll through the menu options in ascending order increase value scroll through the menu options in descending order DOWN decrease value Menu DMX address Address① setting Wireless Wireless① Enabled 80~139℃90℃ /176~282℉194℉ Lamp off if Temperature①...
Page 8
LXMH10002 Reset Reset all Pan&Tilt Reset Pan&Tilt Movment Pan Reverse① ON/OFF Pan Reverse Tilt Reverse① ON/OFF Tilt Reverse Pan Degree① 630/540 Choose Pan Degree Encoders① ON/OFF Encoder wheel Pan/Tilt Mode① Stand/Smooth on/off Choose pan/tilt mode UI Set Mic Sens. ③...
Page 9
LXMH10002 Users User Mode① Standard Standard mode Extended Extended Basic-8bit mode Basic-16bit Basic-8bit User mode Basic-16bit mode User program mode Edit User③ Max Channel = XX Edit users mode PAN = CH01 =XXX Calibration③ -Password- Password: =XXX Color Calibrate channel value Fixture ID③...
Page 10
LXMH10002 Play① DMX Receive DMX Receive Slave Receive Slave Receive 1,2,3 Choose slave position Sequence Master / Alone Run Sequence Music Master / Alone Music mode Select Chase② Chase Part 1 Chase 1 ~ 8 Chase 1 Select and run...
LXMH10002 Stand-Alone Mode The device starts running in stand-alone mode after connection to the mains. This mode allows you to use the device without controller. Connect the device to the mains to switch it on. Press MENU to enter the menu.
Page 12
LXMH10002 DMX Channel Values channel function from description pan coarse pan fine tilt 1 tilt 1 coarse tilt 1 fine tilt 2 tilt 2 coarse tilt 2 fine movement speed from fast to slow normal movement with back-out all tilt...
Page 13
LXMH10002 shutter closed effect 1 from slow to fast effect 2 from slow to fast strobe effect from slow to fast effect 3 from slow to fast shutter effect 4 from slow to fast pulse effect in sequences effect 5 from slow to fast...
Page 14
LXMH10002 colour bounce black R full, G up, B 0, W 0 R down, G full, B 0, W 0 R 0, G 255, B up, W 0 R 0, G down, B 255, W0 R 0, G 0, B 255, W up...
LXMH10002 black continuous colour colour F green blue white all colours normal reset all pan and tilt reset control display off display on hibernation Unique Features The Remote Device Management allows the user to control the device from a distance. Every single device features a unique RDM code.
Page 17
Velleman® Service and Quality Warranty Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations.