Luxibel LX131 User Manual
  1. Manuals
  2. Brands
  3. Luxibel Manuals
  4. Lighting Equipment
  5. LX131
  6. User manual

Luxibel LX131 User Manual

Cyberpix ccww 5x5 matrix panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

LX131
CYBERPIX CCWW 5x5 MATRIX PANEL
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Luxibel LX131

Summary of Contents for Luxibel LX131

  • Page 1 LX131 CYBERPIX CCWW 5x5 MATRIX PANEL USER MANUAL...
  • Page 2 LX131 V. 01 – 14/09/2015 ©Velleman nv...

  • Page 3: Safety Instructions

    Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Luxibel ® ! Please read the manual thoroughly before bringing this device into service.

  • Page 4: General Guidelines

    LX131 General Guidelines Refer to the Velleman ® Service and Quality Warranty on the last pages of this manual. Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm) in front of the openings.

  • Page 5: Mounting And Connection

    LX131 Mounting and Connection Choose a suitable mounting spot. Mount the device in the desired angle using the included bracket. Connect the power cord to the mains. Disconnect after use. Mounting the Device  Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.

  • Page 6: Connecting The Device

    LX131 Connecting the Device Power Connect the device to the mains with the power plug. Power all devices directly off a grounded switched circuit. Do not connect the device to a rheostat or dimmer circuit, even when using the rheostat or dimmer channel solely for 0 % to 100 % switching.

  • Page 7: Operation

    LX131 Operation The device can be used in the following modes:  manual control  Kling-Net/ArtNet/sACN (E1.31)  with a DMX-512 controller. Control Panel Access the control panel functions using the four panel buttons located around the display: Button Function ...

  • Page 8: Manual Control

    LX131 255.0.0.0 Netmask 1 6. Set Netmask 255.255.0.0 Netmask 2 255.255.255.0 Netmask 3 ArtNet Protocol select ArtNet protocol 7. Set Net Protocol sACN Protocol select sACN protocol Kling-Net Protocol select Kling-Net protocol Display type decimal display HEX display 8. Set Universe...
  • Page 9 LX131 To set the device to work with a DMX controller: Press MENU until <Set Channel Mode> is displayed and press ENTER. Use UP and DOWN to select a channel mode and press ENTER. Press MENU until <Set DMX Address> is displayed and press ENTER.

  • Page 10: Cleaning And Maintenance

    (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.luxibel.com. The information in this manual is subject to change without prior notice. © COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv.
  • Page 11 Velleman® Service and Quality Warranty Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations.

Table of Contents