Fuse Replacement; Cleaning; End Of Life - HT HT32 User Manual

Table of Contents

Advertisement

5.3. FUSE REPLACEMENT

Before replacing fuses, disconnect test leads from any energized circuit to
avoid electrical shock.

5.4. CLEANING

To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water.

5.5. END OF LIFE

CAUTION: this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal.
CAUTION
Fig. 11: Fuse replacement
EN - 18
LEGEND:
1. Turn
OFF
disconnect the test leads from the
input terminals.
2. Remove the protective holster from
the meter.
3. Unscrew the battery cover and
remove the battery.
4. Remove the defective fuse and
install a new fuse of the same size
and rating (fast type 10A/1000V).
Make
sure
the
centered in the fuse holder. Re-
screw
the
battery
reposition the protective holster.
HT32
the
meter
and
new
fuse
is
cover
and

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT32 and is the answer not in the manual?

Table of Contents