Coding Your Meter - EPS Bio Technology EasyPlus User Manual

Coding Your Meter

A new Code Card is inside each new box of test strips. Code your meter every time
you open a new box of test strips.
1. The LCD display will
show "no CODE" the
first time batteries
are installed.
Note:
Do not discard the code card until you use all test
strips in the same vial.
2. Insert the code card
into the slot. The
screen displays "OK".
3. The code number will be
shown on the LCD. Make
sure the code number on
the LCD matches the code
number on the test strip vial.
12