Channel Dimmer; Preset Functions - Work Pro W4 PRO DMX User Manual

2. Operation Guide

2.3.2 Channel Dimmer

2.4 Preset Functions

7
1. When Manual Dimmer mode is active, tap the
channel button, the corresponding channel LED
blinks indicating your selection and the Segment
Display shows the intensity of last change.
2. Tap the Up/Down button to adjust the channel
intensity.
3. Continue steps 1-2 until you've set all 4
channels.
Keep pressing F button, tap Preset button
f00
several times to change functions between
Fade Time/Dimmer/Preheat/Speed/Program.
Fade Time
f00
The Segment Display shows "F"
followed by two numbers 00-99.
Tap Up/Down button to set fade
time from instant to 10 seconds.