Operation Guide; Mode Select; Dmx Mode - Work Pro W4 PRO DMX User Manual

2. Operation Guide

2.1 Mode Select

2.2 DMX Mode

When the Segment Display shows "IN" and the DMX LED lights, this unit serves
as a 4 channel DMX dimmer pack. The DMX Signal LED blinks when DMX signal
is present.
5
Press and hold down F button first, tap the
I N
Signal Select button causing the Segment
Display shows "IN", DMX LED lights indicating
DMX mode is active, this unit serves as a 4
channel DMX dimmer pack.
While holding down F button, tap Signal
Select button, when the Segment Display
shows"OUT", Master LED lights indicating
Master mode is active, this unit serves as a
4 channel DMX chaser when linkup use.
1. Tap the channel button, the corresponding
0 0
channel LED blinks indicating your selection
and the Segment Display shows the DMX
address of last time.