Epson Stylus CX7300 Instruction Manual page 5

All in one printer epson stylus cx7300

Hide thumbs Also See for Stylus CX7300:

If ink-lacking light of the printer is flashing, it is aimed to remand you to change the cartridges.

Carriage move out

Another reset method is: turn down the printer for one minute and then turn it on.

5. Refill Ink

Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the picture shown above, please use refill kits to fill

ink into Reservoir bottles. Carefully pull out the rubber plugs from the ink refill holes (There is possibility of ink spattering. Pls be careful.)

Refill ink according to the colors. Then re-cap the rubber.

during the process of refilling

Attention for Maintenance:

Take out the CISS including the inner cartridges and other components. Then remove support arm from printer, and

re-install original cartridges. Please inquire local dealer before sending to maintenance.

Notice:

1. Please don't take out cartridge at random after installing the CIS system. Keep the reservoir bottles on the same

level with the printer.

Take out cartridges

ink.)

(Please keep the printer and the reservoir bottles at the same horizontal line

Press ink-changing button

Press the ink-changing button again,

then you will find the cartridges are

full of ink. And you can print again.