Program Mode; Function Keys; 12/24 Hour Time Setting; Time Zone Setting - La Crosse Technology WS-7014U Instruction Manual

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or either the IN or
the OUT buttons are pressed during programming modes the unit will
confirm/set the last information entered—the display will stop flashing and
return to normal time-date readings. If you don't leave the program mode
during the programming of sections III through VIII, you can advance to
step 3 of the next program setting. If you do leave the program setting (or
want to program a specific setting) follow each instructional step to
program that setting.
I. FUNCTION KEYS
The function keys are located on the front of the unit directly below the
LCD.
II. 12 OR 24 HOUR TIME SETTING
III. TIME ZONE SETTING
1. Press and hold the SET button for 3 seconds, or until "12 h"
flashes in the DATE LCD.
2. Press and release the CH button to toggle between 12 and 24-
hour time.
3. Press and release the SET button to confirm the 12/24-hour
setting, and to advance to Time Zone Setting.
The default time zone is EST, "-5hr" (Eastern Standard Time), to
change this setting:
1. Press and hold the SET button for 3 seconds, or until "12 h"
OR "24 h" flashes in the DATE LCD.
2. Press and release the SET button 1 more time to enter the
Time Zone setting mode. The default Time Zone "-5" will
flash in the DATE LCD.
7