Daylight Saving Time Setting - La Crosse Technology WS-7014U Instruction Manual

3. Select your appropriate time zone using the CH button.
During selection of the Time Zone, the 3 letter abbreviations
for the time zones found in North America will flash across
the top of the TIME LCD. Observe the chart below, showing
the corresponding abbreviations, time zones, and codes.
EST;
CST;
MST;
PST;
ALA;
HAW;
Note: There are more time zones represented by numbers than there are
represented by 3 letter abbreviations. If you live in North America you
need only be concerned with the ones in the chart above.
4. Press and release the SET button to confirm, and advance to
the Daylight Saving Time setting.
IV. DAYLIGHT SAVING TIME (DST) SETTING
1. Press and hold the SET button for 3 seconds, or until "12 h" or
"24 h" flashes in the DATE LCD.
2. Press and release the SET button 2 more times to reach the
DST selection mode. "DST 1" is the default setting and will
be flashing in the DATE LCD.
3. Press and release the CH button to select "DST 0" or "DST
1."
4. "DST 0" indicates that the feature is off and the WWVB will
not change times automatically. "DST 1" indicates that the
feature is on and the WWVB will change times automatically.
Note:
follow Daylight Saving Time, and should select "DST 0."
TIME ZONES
GMT
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Some locations (Arizona and parts of Indiana) do not
8
0
-4
-5
-6
-7
-8
-9
-10