Functional Description - Bosch GST 65 BE Professional Original Instructions Manual

21 | English
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
u
rials are particularly dangerous. Dust from
light alloys can burn or explode.
u Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
u
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Symbols
The following symbols can be important for the
operation of your power tool. Please memorise
the symbols and their meanings. The correct in-
terpretation of the symbols helps you operate the
power tool better and more secure.
Symbol Meaning
Wear a dust respirator.
Wear safety goggles.
Wear ear protectors. Exposure
to noise can cause hearing
loss.
Compulsory reading.
Symbol for protection class II
(completely insulated).
F 000 622 329 | 06.2010

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceram-
ic plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Lock-on button for On/Off switch
2 On/Off switch
3 Thumbwheel for stroke rate preselection (GST
65 E/GST 65 BE)
4 Base plate
5 Guide roller
6 Saw blade*
7 Contact protector
8 Screwdriver
9 Stroke rod
10 Splinter guard*
11 Screw (2x)
12 Scale for mitre angle
13 Angle gauge**
14 Bolt hole
15 Positioning pin/mark
16 Lead for the parallel guide
17 Locking screw for parallel guide*
18 Parallel guide with circle cutter*
19 Centring tip of the parallel guide*
*The accessories illustrated or described are not includ-
ed as standard delivery.
Bosch Power Tools
**Commercially available (not included in the delivery
scope)
Noise/Vibration Information
Measured values determined according to EN
60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 81 dB(A); Sound
power level 92 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting wood: Vibration emission value a
m/s , uncertainty K=1.5 m/s ,
2 2
Cutting sheet metal: Vibration emission value
a =3.5 m/s , uncertainty K=1.5 m/s .
2 2
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
Dados Técnicos
Jigsaw
Article number
Stroke rate control
Rated power input
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual ma-
chines may vary.
Assembly
Replacing/Inserting the Saw Blade
u Before any work on the machine itself, pull
the mains plug.
When mounting the saw blade, wear protec-
u
tive gloves. Danger of injury when touching
the saw blade.
Bosch Power Tools
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
=2.5
actually doing the job. This may significantly re-
h
duce the exposure level over the total working pe-
riod. Identify additional safety measures to protect
the operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
3 601 B81 7..
-
W
spm
mm
mm
mm
mm
o
kg
Selecting a Saw Blade
An overview of recommended saw blades can be
found at the end of these instructions. Use only
T-shank saw blades. The saw blade should not be
longer than required for the intended cut.
Use a thin saw blade for narrow curve cuts.
F 000 622 329 | 06.2010
22
English |
GST 65 BE
400
500-3100
18
65
12
3
45
1,7