No
Parts
2
Fan-Motor
3
Heat Exchanger
Samsung Electronics
Procedure
1) Loosen fixing screw of the Guard-Fan.
2) Turn the Guard-Fan to separate from the
Cabi-Front.
4) Remove the nut flange (Turn to the right to
remove, as it is a left hand screw)
5) Separate the fan.
6) Loosen four fixing screws to separate the
motor.
1) Do "1", above.
2) Loosen four fixing screws of Ass'y-Frame and
Partition.
3) Disassemble the inlet and outlet pipe by
welding.
4) Separate the heat exchanger.
Disassembly and Reassembly
Remark
4-5