Canon EOC-1DX Instruction Manual page 648

Manually Erasing Dust (Repair Function)
You can erase dust spots in an image by selecting them one by one.
1 In the main window, select the image you want to
erase dust spots.
2 Click the [Stamp] button.
The copy stamp window appears.

3
When the image has redrawn itself, double-click the
point from where dust is to be erased.
The display changes to 100% view.

The display position can be changed by dragging.

4 Click the button that matches the dust spot to be
erased.
If the dust spot is dark in color, click the [

the dust spot is light in color, click the [
When you move the cursor over the image, the dust erasure

range appears as [ ].
5
Place the dust spot to be erased within the [ ] and
click.
The dust spot within the [ ] is erased.

Click on another part of the image to continue erasing dust spots

in the image.
Double-
click
To erase dust in another part of the image, click the button

clicked in step 4 again to cancel dust erasure processing and
perform the operation again from step 3.
When the dust spot cannot be erased, [

6
Click the [OK] button to return to the main window.
The [ ] mark

spots have been erased.
] button.
] is displayed.
(p.126) is displayed on an image from which dust
Introduction
] button, and if
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Click
Advanced 3
Image Editing
and Printing
Processing 4
Large Numbers
of Images
Editing
5
JPEG/TIFF
Images
Reference
Index
75