O Custom White Balance - Canon EOC-1DX Instruction Manual

O Custom White Balance

Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Perform this procedure
under the actual light source to be used.
Up to five sets of Custom white balance data can be registered to the
camera. You can also append a name (caption) to the registered
Custom white balance data.
3 Registering Custom WB
There are two ways to register Custom white balance data. You can either
take a picture and register it, or register an image already saved in the card.
Record and register WB
138
Select [Set Custom WB].
1
Under the [z1] tab, select [Set
Custom WB], then press <0>.
Select the Custom WB number to
2
be registered.
Press <0>.
Turn the <5> dial to select 1 to 5 for
<O*>, then press <0>. The
Custom WB data will be registered
under the selected number.
Select [Record and register WB].
3
Turn the <5> dial to select [Record
and register WB], then press <0>.
The LCD monitor will turn off, and the
selected number [ * ] will blink on the
top LCD panel.