RFC RX1600 Installation And Operation Manual page 20

TX 1600 HAND-HELD TRANSMITTER / MICROPHONE
HAND-HELD TRANSMITTER / MICROPHONE EQUIPPED WITH:
• channel selector (inside the battery compartment) for selecting one of
the 16 available frequencies (see the label showing the 16 frequencies
near the switch);
• cardioid microphone;
• ON/OFF switch (for the transmitter activation);
• a green LED indicating the battery charge status.
USE
• (!) Make sure that the power switch is in the OFF position before
inserting batteries.
• Access the battery compartment by unscrewing the cylindrical part of the
handle and insert two AAA alkaline batteries according to the designated
polarity (+/-).
• Make sure that the channel (/ frequency) selected using the rotary dial
marked CHANNEL corresponds to that of the respective receiver.
• When the transmitter is switched on, the green LED lights up (this LED
remains lit constantly during normal operation; it flashes when the
battery charge is low and the batteries need to be replaced).
20