I/O Ports - Supero SUPERSERVER 6015B-UR User Manual

S S
UPER ERVER 6015B-UR/6015B-U/6015B-NTR/6015B-NT User's Manual
All JF1 wires have been bundled into single keyed ribbon cable to simplify their
connection. The red wire in the ribbon cable plugs into pin 1 of JF1. Connect
the other end of the cable to the Control Panel printed circuit board, located just
behind the system status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip-
tions of JF1.
Figure 5-1. Front Control Panel Header Pins (JF1)
5-4

I/O Ports

The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
Mouse
(Green)
USB0/1 Ports
Keyboard
(Purple)
20 19
Ground
x (key)
Power LED
HDD LED
NIC1
NIC2
OH/Fan Fail LED
Power Fail LED
Ground
Ground
2 1
Figure 5-2. Rear Panel I/O Ports
COM1 Port
(Turquoise)
5-6
NMI
x (key)
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset
Power
VGA Port
(Blue)
LAN1 LAN2
UID