Speed Defrost; Cook By Weight - Sunbeam SGDJ901 User Manual

9
8
7
6
5
4
3
2
1
0
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
1. SET STAGE 1: Follow steps 1 and 2 in "One-stage Cooking". DO NOT TOUCH START/STOP
2. SET STAGE 2: Touch COOK then enter proper cooking time and (lower) power level.
(Most 2-stage recipes use lower power for second stage.)
3. Touch START/STOP.
4. NOTE: After total time elapsed, the system will sound beeps with END in display. And the beeps will continue to
sound every two minutes automatically until the door is opened or any pad is touched.

SPEED DEFROST

1. Touch SPEED DEFROST.
2. Enter desired defrosting time by touching correct number pads. Digital timer sets minutes and seconds from
Left to right so a single digit can be set (5 for 5 seconds) or up to 4 digits (2405 for 24 minutes 5 seconds).
3. Touch START/STOP.
NOTE:
·After setting SPEED DEFROST, oven can be programmed to automatically switch to one or two-stage cooking.
·For speed defrost and one stage cooking, follow steps above. Before touching START/STOP, touch COOK,
enter time and power level. Then touch START/STOP.
·For speed defrost and two stage cooking, follow steps above. Before touching START/STOP, enter two-stage
cooking programs.
·You may need to turn food over at the middle of cooking time to obtain uniform cooking.

COOK BY WEIGHT

1. Touch COOK BY WEIGHT.
2. Enter the one digit code by touching the correct number pad.
3. Enter weight.
4. Touch START/STOP.
Cook By Weight Code Description
CODE TYPE
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
MAX
7