Precautions To Avoid Possible Exposure To Excessive Microwave Energy; Installation Guide - Sunbeam SGDJ901 User Manual

17. Use only thermometers specifically designed for microwaves.
18. Do not operate any heating or cooking under this microwave.
19. Be certain the glass tray and roller rings are in place when using the microwave.
20. Read and follow the specific "Precautions to Avoid Possible Exposure to Excessive Microwave Energy" section
found below.
21. When cleaning microwave surface and door, use only mild, nonabrasive soaps or detergents applied with a sponge
or soft cloth.
22. This microwave should be serviced only by qualified service personnel. For service and repair, please contact our
Customer Support Center at 800-324-0340
23. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate
the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment
into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an
experienced radio/TV technician for help.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE ENERGY
1. Do not attempt to operate this microwave with the door open. Door open operation can result in harmful exposure
to microwave energy. It is important not to defeat or tamper with the door interlocks.
2. Do not place any objects between the microwave front face and the door, or allow soil or cleaner residue to
accumulate on sealing surfaces.
3. Do not operate the microwave if damaged. It is particularly important that the microwave door be properly closed
and there is no damage to the door (bent), hinges and latches (broken or loosened), or door seals and sealing
surfaces.
4. The microwave should not be adjusted or repaired by anyone except properly qualified service personnel.

INSTALLATION GUIDE

1. Make sure all packing materials are removed from inside the microwave door.
2. Check the microwave for damage, such as misaligned or bent door, damaged door seals and sealing surface,
broken or loose door hinges and latches, and dents inside the cavity or on the door. If there are any damages, do
not operate the microwave and contact Customer Service at 800-324-0340.
3. This microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be
cooked inside.
4. Do not place the oven where heat, moisture, or high humidity is generated. Do not place microwave near
combustible materials.
5. For correct operation, the oven must have sufficient air flow. Allow 8" of space above the microwave, 4" at the back,
and 2" on each side of the unit.
3