Technical Problems - Revab CANTO NXT User Manual

In the unlikely event that you experience technical
problems with your wheelchair, please contact your
dealer. The dealer will decide whether he can repair
the chair or whether it will have to be returned to the
factory.
You may be able to solve some problems yourself.
The seat angle can no longer be adjusted
Check whether the operating cable is bent or has
n
become trapped somewhere.
n Check whether the gas spring block moves when
the handle is pressed. Lubricate the gas spring
block if necessary.
Movable components such as the push­bar, height­
adjustable armrest, legrest and sides get stuck
n These components can become jammed in the
frame if too much pressure is exerted on them.
Carefully tap the components loose with a plastic
hammer.
Socket screws for one­off adjustment cannot be
loosened
The screws may have been over-tightened. Try
n
placing a tube over the long end of the Allen
key so as to lengthen the turning arm. Now try
loosening the screw.
The socket head may be stripped: Try gripping the
n
screw with a monkey wrench. If this fails consult
your dealer.
The brakes have insufficient braking power or do not
brake uniformly on both sides
You should adjust the brakes; go to page 25.
n

Technical problems

GB31