Revab CANTO NXT User Manual page 51

Left­hand push­handle (red sticker)
Settings and adjustments
Backrest angle (one adjustment)
n Loosen the socket screws (A) in the
backrest hinge points.
Set the backrest to the required angle.
n
Then retighten the socket screws.
n
N.B.: make sure the left and the right
push bars are at the same angle with
the aid of the graduation mark.
A
Backrest angle (continuously adjustable)
The backrest angle can be adjusted using the
central gas spring and the operating lever on
the left-hand push-handle.
n Squeeze the left-hand operating lever to
disconnect the gas spring.
Adjust the backrest to the desired angle.
n
Release the lever.
n
GB19