Revab CANTO NXT User Manual page 52

Settings and adjustments
Seat angle
The seat angle can be adjusted using the 2
gas springs and the operating lever near the
push-handle.
Press the operating levers to disengage
n
the gas springs.
n Set the seat angle as required.
Release the operating levers.
n
Seat angle range
The seat angle range is 30°. It can be adjusted
from 0° to 30° and from -5° to 25°.
Required seat height
42 cm
> 44,5 cm
N.B.: seat angle range in combination
with the continuously adjustable backrest
angle adjuster: 0˚ to 22˚ or ­5˚ to 17˚.
Armrests
The height, depth and width of the armrests
can be adjusted.
Adjusting the height
1. Loosen the star knob (A) at the side of the
armrest a few turns.
2. Set the armrest to the required height.
3. Retighten the star knob.
Adjusting the depth
1. Loosen the screws (B) fully (different hole
in armrest) or partially (using the slot).
2. Set the armrest to the required depth.
3. Retighten the socket screws.
GB20
Seat angle Position
0˚ tot 30˚ G1
-5˚ tot 25˚ G2
0˚ tot 30˚ G2
-5˚ tot 25˚ G3
G1
G2
G3
Right­hand push­handle (green sticker)
A A B