Revab CANTO NXT User Manual page 54

Settings and adjustments
Fixing the ankle hinge
1. Set the ankle angle to the desired
position.
2. Drill a hole in the hinge.
3. Fix the ankle hinge in place by means of
the supplied fixing pin.
Adjusting the push­handle
1. Loosen the butterfly knob one turn.
2. Adjust the handle to the required height.
3. Retighten the butterfly knob.
Anti­tipping supports
The anti-tipping supports can be adjusted
using the lever. The recommended height is
4 cm from the floor.
GB22
1
ø 3 mm
2 3