Displaying The Live Monitor (Current Status Of The Boiler); Setting The Display Contrast; Setting The Language - Vaillant VU GB 806/5-5 Operating Instructions Manual

6 Auxiliary functions
6.2 Displaying the Live monitor
(current status of the boiler)
S.04
Heating mode
burner on
Back
6.3 Live monitor (current status of the boiler, example)
Menu ¬ Live Monitor
This function allows you to display the current status of
your boiler. In addition, the meaning of the message is dis-
played as plain text.
The display is automatically updated if the boiler status
changes.
Status codes Meaning
Displays in Heating mode
S 00 Heating mode: No heat demand
S 02 Heating mode: Water pump running
S 03 Heating mode: Ignition sequence
S 04 Heating mode: Burner ignited
S 06 Heating mode: Fan overrun
S 07 Heating mode: Pump overrun
Heating mode: Remaining anti-cycling time xx
S 08
min
Displays in cylinder charging mode
S 20 Warmstart demand
S 22 DHW mode: Pump running
Special cases
S 31 No heat demand, summer operating mode
S 34 Heating mode: frost protection
6.1 Status codes and their meaning (selection)
22
6.3

Setting the display contrast

Display contrast
20
Back
6.4 Setting the display contrast
Menu ¬ Information ¬ Display contrast
Using this function, you can set the display contrast in rela-
tion to the brightness of the surroundings to ensure that
the display is clearly legible.
6.4

Setting the language

Language
02 English
Cancel
6.5 Setting the language
Your competent person should have set the boiler to your
desired language. If you wish to set another language, you
can proceed as follows:
> Press and hold the right-hand selector button
and the plus button
> Also press the fault clearance key briefly.
> Continue to press and hold the right-hand selector but-
ton and the plus button
display offers you the option to set the language.
> Use the minus button
to select your desired language.
> Confirm the change by pressing the right-hand selector
button ("OK").
You must confirm the set language twice to ensure that you
have not accidentally set an incorrect language.
i
If you have accidentally set a language that you
cannot understand, you can change this as
described above.
Operating instructions ecoTEC plus 0020134822_01
Ok
at the same time.
until the
or plus button