Behringer X32 User Manual page 6

6
X32 RACK DIGITAL MIXER User Manual
01
Ch01
01:
con g
home
clip
-6
48V
-12
Reverse
-18
-24
-30
Link Lo Cut
-36
-42
+0.0 2.0
dB Hz
-48
-54
Gain Lo Cut
Gain Lo Cut
+0.00 dB 20 Hz
Link Lo Cut
Input Channels 1-16 are pre-configured to use the local input signals 1-16,
but can be patched to use any other available signal on the audio engine as well,
including mix bus/sub group outputs. Changes of the Channel Source can be
made on the Preamp Config page.
Input Channels 17-32 are pre-configured to AES50 A inputs 1-16, so that
connecting an S16 stage box to port A will automatically feed the channels.
LeOnde.mp3
00.05.00 00.00.00
con g
home
Bus Con guration
clip
-6
-12
-18
Link
-24
-30
-36
-42
-48
-54
Gain
00.00 dB
Link
The configuration of Mix Bus Channels 1-16 can be pre-set (in the Setup/Global
page) or can also be configured on an individual, per-channel basis. The bus
processing includes (in this order):
Insert point (swappable between post-EQ and pre-EQ operation)
•
6-band fully parametric EQ
•
Compressor/expander (swappable between post-EQ and pre-EQ operation)
•
Bus sends to 6 matrices
•
Main LR panning
•
Mono/Center level
•
A: S16
0:00 - 0:00
B: -
gate dyn eq
Insert Position
t
In
Delay Pre
0.3 ft
Source
0.10 m
OFF
Input 01 0.03 ms
Input 02
Input 03
Input 04
Delay
Input 05
Input 06
Source Delay
Input 0.3 ms
Select Delay
13:44:43
29 November 2010
gate dyn eq
Bus Insert Position
∑
Channel Sends
Pre
All Channel Sends
Pre Con guration
...
Inputs
Pre EQ
Pre Fader
Post Fader
Sub Grou
Send Pos.
Inputs
Bus Sends
14:11
A: 48K
: 37
C: X-USB
sends main
Ins Post
Insert
OFF
InsFX 1L
InsFX 1R
InsFX 2L
InsFX 2R
InsFX 3L
InsFX 3L
Ins Pos Insert
PRE InsF
Insert Connect
Aux Return Channels 1-8 are pre-configured to use the 6 aux input signals,
and the two USB playback outputs, but can be patched to use any other available
signal of the console as well.
FX Return Channels 1L-4R control the 4 stereo output signals of
side-chain FX1-4.
MyProj.prj
Scene01
sends main
Insert Post
Insert
Ins 01
Ins 02
Ins 03
Ins 04
...
FX 01
FX 02
Insert Pos. Insert
Pre
Insert Connect
Main Bus Channels LR/C are always available and independent from
Mix Buses. The processing steps for this signal path include (in this order):
Insert point (swappable between post-EQ and pre-EQ operation)
•
6-band fully parametric EQ
•
Compressor/expander (swappable between post-EQ and pre-EQ operation)
•
Bus sends to 6 matrices
•
Matrix Channels 1-6 are fed exclusively by MAIN LRC and Mix Bus 1-16 signals.
The processing steps include (in this order):
Insert point (swappable between post-EQ and pre-EQ operation)
•
6-band fully parametric EQ
•
Compressor/expander (swappable between post-EQ and pre-EQ operation)
•