Behringer X32 User Manual page 10

10
X32 RACK DIGITAL MIXER User Manual
(22) (23)
(25)
TALKBACK input connects a talkback microphone via XLR cable.
(22)
MONITOR outputs send audio to monitor speakers via ¼" balanced cables.
(23)
AUX IN and OUT jacks send and receive signals via ¼" and RCA connectors.
(24)
XLR OUT jacks send audio via XLR cable. Output signals are configured on
(25)
the Routing/Aux Out page of the MAIN DISPLAY.
X-USB card provides 32 channels of input and output via USB cable to and
(26)
from any connected personal computer DAW application.
ETHERNET connector allows full OSC-based remote control of the X32 RACK.
(27)
MIDI IN/OUT allows the unit to send and receive MIDI commands via
(28)
standard 5-pin DIN cables.
(24)
(26) (27)
(31)
(28) (29) (30)
ULTRANET connector sends 16 channels of audio to a P16 monitoring system.
(29)
AES50 A and B connectors allow 96 channels of bidirectional audio for
(30)
connection to S16 digital snakes or other X32 family products. Shielded
CAT-5e cable should always be used for AES50 connections between X32
and S16 units.
XLR IN jacks receive inputs via XLR cable. These inputs feature 16 MIDAS-
(31)
designed mic/line preamps with 72 dB of gain range. Each input has an
adjacent red LED to indicate when 48 V phantom power supply is engaged.