Advertisement
Operation Guide 3429
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Setting
Screen
Use D (+) and B (–) to change the setting.
Hours, Minutes
Press D to toggle auto-repeat on (
Auto-repeat
and off (
Press D to toggle the progress beeper on (
Progress Beeper
and off (
•
To specify a countdown start time of 24 hours, set
4. Press A to exit the setting screen.
•
You also can perform steps 1 and 2 of the above procedure whenever you need to
view the current auto-repeat and progress beeper settings.
E-30
Alarms
This watch has three independent multi-function alarms
Alarm number
Alarm number
(including one snooze alarm). When an alarm is turned
on, the alarm tone sounds when the alarm time is
reached. You also can turn on an Hourly Time Signal that
causes the watch to beep twice every hour on the hour.
•
There are three alarm screens:
(snooze). The Hourly Time Signal screen is indicated by
.
•
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C (page
Alarm date
Alarm date
(Month – Day)
(Month – Day)
E-7).
Alarm time
Alarm time
(Hour : Minutes)
(Hour : Minutes)
E-32
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
screens until the one whose time you want to set is
displayed.
•
The snooze alarm operation repeats every five minutes.
2. After you select an alarm screen, hold down A until the hour setting of the alarm
time starts to flash, which indicates the setting screen.
•
This operation turns on the currently selected alarm automatically.
E-34
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every five minutes, until you turn the alarm off (page E-37).
•
Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode time.
•
To stop the alarm tone after it starts to sound, press any button.
•
Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-9)
Displaying the
setting screen (page E-34)
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
E-36
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Hourly time signal
Hourly time signal
Signal (
on indicator
on indicator
2. Press A to toggle it on and off.
•
The Hourly Time Signal on indicator is shown on the
display in all modes while this function is turned on.
E-38
Button Operation
displayed)
displayed).
)
).
.
,
, and
).
To use the countdown timer
Press D while in the Countdown Timer Mode to start the
countdown timer.
•
The countdown timer operation continues even if you
exit the Countdown Timer Mode.
Press D while a countdown operation is in progress to
•
pause it. Press D again to resume the countdown.
•
To stop a countdown operation completely, first pause
it (by pressing D), and then press A. This returns the
countdown time to its starting value.
Alarm Types
The alarm type is determined by the settings you make, as described below.
•
Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
•
Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
•
1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
•
Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
to sound every month at the time you set, on the day you set.
3. Press C to move the flashing in the sequence shown below to select other
settings.
Hour
Minutes
4. While a setting is flashing, use D and B to change it as described below.
Screen
To do this:
Change the hour and minutes
Change the month and day
5. Press A to exit the setting screen.
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm screen.
Alarm on indicator
Alarm on indicator
2. Press A to toggle the selected alarm between on and
Snooze alarm
Snooze alarm
indicator
indicator
off.
•
Turning on an alarm displays the alarm on indicator on
its Alarm Mode screen (
•
In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
•
The alarm on indicator flashes while the alarm is
sounding.
•
The snooze alarm indicator flashes while the snooze
alarm is sounding and during the 5-minute intervals
between alarm operations.
Illumination
This watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
•
See "Illumination Precautions" (page E-48) for other important information about
using illumination.
To illuminate the display
In any mode (except when a setting screen is on the display), press B to turn on
illumination.
•
You can use the procedure below to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press B, the illumination will remain on for about
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
E-31
E-33
Month
Day
Do this:
Use D (+) and B (–).
•
With the 12-hour format, set the time
correctly as a.m. or p.m. (P indicator).
•
To set an alarm that does not include a
month and/or day, set
for each setting.
E-35
,
, or
).
E-37
E-39
Advertisement
