Shutting Down The Starboard - Hitachi Solutions StarBoard PX-DUO-50P User Manual

StarBoard PX-DUO-50P/65P
(5) Start "Go" → "Applications" → "StarBoard" → "Lsadrv" → "LsCamWiz" and then
adjust the sensor in accordance with the procedure on page 4-6.
If the positions of the pen tip and cursor are out of alignment, select "MENU" on the
StarBoard Software toolbar → "Settings" → "StarBoard" → "Calibrate" and then perform
position alignment.
Important
Conduct sensor adjustments upon first-time operations and
whenever the board has been moved.
Not doing so may cause operation errors.

3.1.3 Shutting Down the StarBoard

(1) Quit the StarBoard Software.
(2) Shut down PC.
(3) Turn off the PC connected to the StarBoard.
(4) Press the power button at the lower left corner of the Digitiser to turn off the plasma display.
Check that the POWER LED goes off.
3-4
Using the StarBoard
English