StarBoard PX-DUO-50P/65P
Follow the procedure below to connect the StarBoard to the PC and the power outlet.
- PX-DUO-50P
(1) Connect the RGB cable to the RGB connector of the Plasma display, and then tighten the
screws. Connect the other end of the RGB cable to the RGB connector of the PC, and then
tighten the screws. (How to connect the cables, refer to the Plasma Display Operation
Manual.)
(2) Connect the USB cable to the USB connector of the PC.
(3) Connect the PC and Plasma display power cables to the power outlet.
(4) To output the PC audio, connect the PDP audio input and PC audio output with audio cable.
(Refer to the instruction manual for how to connect to the PDP or speaker setting.)
2-5
StarBoard Setup
English