Name Of Each Part; Names Of Parts On The Front Of The Product (Configuration Example Of Wall Mounting Stand) - Hitachi Solutions StarBoard PX-DUO-50P User Manual

StarBoard PX-DUO-50P/65P

1.3 Name of Each Part

1.3.1 Names of Parts on the Front of the Product (Configuration example of
Mobile stand)
Additional
Function button
Remote control
photoreceptor
*1
Power button
Shelf
Caster
*1 Pressing the power button turns the power on and off.
When the power button on the Plasma display is on, the POWER lamp in the remote control
photoreceptor lights green.
When the power is turned off (Standby) with the remote control:
The POWER lamp lights red.
When the power is turned on (Power-on) with the remote control:
The POWER lamp lights green.
*2 The Digitiser detects the position of the electronic pen or your finger and receives the
electronic pen button and switch operation information, and transmits this data to the PC.
The Digitiser itself does not have a power button. The Digitiser is turned on and off by
plugging in and unplugging the USB cable. Be sure to unplug the USB cable from the PC
after using the Digitiser.
Reflective tape
(Inner Side of the Frame)
Digitiser
Mobile Stand
1-5
About the StarBoard
*2
Function button
Pen tray
Handle
English