Table of Contents
Advertisement
CARE & MAINTENANCE
REGULAR CARE OF THIS RESTRAINT:
Please check the following items regularly to ensure the safety of your child:
A. Check the webbing for fraying.
B. Check that the buckle clicks and is not sluggish or sticky in operation.
C. Ensure there are no cracks in moulding or the plastic moulding.
D. Check the harness adjuster is operating and is clamping the webbing.
E. If any part of the restraint is cracked or broken, seek repair immediately or replace the child
restraint.
F. Use only mild soap and water to clean all metal and plastic parts of the restraint. Do not use
chemicals or cleaning agents.
54
Instructions for Installation & Use - Series No. 8000/B/2010
TO CLEAN HARNESS BUCKLE
If sticky liquids such as baby formula, fruit juice, etc. get inside your
Harness Buckle, it may become sluggish. An indication of a sluggish
Harness Buckle is that you cannot hear a click when engaging the
Harness Tongues. To restore the Harness Buckle to good working
order it needs to be cleaned as follows:
A. From the underside of the restraint pull each crotch 3-bar slide
then turn 3-bar slide and push through each slot to remove the
Harness Buckle from the restraint.
B. Place the Harness Buckle under warm (max. 40 degrees Celsius)
running water as shown below. Let the water run through the
mouth of the buckle for five minutes.
C. Engage and disengage the Harness Tongues and Buckles several
times until a strong audible click is heard when the last tongue is
inserted.
D. If you still cannot hear a strong audible click after engaging the
Harness Tongues & Buckle, then repeat cleaning several times.
If the Harness Buckle cannot be returned to its original working
condition then contact Safe-n-Sound or Britax Childcare Customer
Service.
E. Refit the harness buckle to the restraint with the red button facing
out & feeding each 3-bar slide through previous used slots, refer
to the following pages if you need to recheck the slots used.
• Pages 15 and 16 Toddler Mode - In-built harness
• Pages 33 to 34 Booster Seat Mode.
TO CLEAN THE COVER
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are
on the care label attached to the cover. When washing cover engage hook & loop strips together to
eliminate other garments being caught. Ensure to keep strips free of lint to work effectively.
Instructions for Installation & Use - Series No. 8000/B/2010
HOW TO CLEAN
Cover
Body
3-bar
slide
A
B
Click
C
55
Hide quick links:
Advertisement
Table of Contents
