Table of Contents
Advertisement
HOW TO USE
ADJUSTING THE CROTCH BUCKLE HEIGHT
The crotch buckle SLIDEGUARD™clip height adjustment is by
threading the 3 bar anchor plates into extra slots to shorten the
buckle height. The seat has the crotch straps fitted in position when
supplied.
A. Lift trim cover to reveal crotch strap slot.
C. Turn the crotch 3-bar slide and push through each slot as shown
right until the Crotch strap assembly is free from the seat.
D. Insert Crotch strap through restraint slot which will position
Crotch strap level with the child's crotch and feed back through
other slot as shown right.
Use Position 2 for smaller children and Position 1 and 3 for larger children.
1. Longest Length
for Toddler mode and
largest child in Booster
Slot
3 Bar Anchor
IMPORTANT :
When replacing cover, ensure none of the harness straps are twisted and that all straps are secure by
pulling each harness strap.
34
Instructions for Installation & Use - Series No. 8000/B/2010
4 Slots
3. Mid Length
2. Shortest Length
for Booster Mode-
for Booster Mode-
Mid size Child
Smallest Child
PLACING CHILD IN THE RESTRAINT USING LAP SASH SEAT BELT &
UPPER ANCHORAGE STRAP
A. Determine whether an upright or reclined installation is
preferred as shown right.
B
B. To move the Recline Foot from reclined to upright mode
or vice versa pull the Foot outwards to unlock it, then
rotate the foot. Push to lock in place. Swing the seat
back until it sits firmly on the vehicle seat.
Instructions for Installation & Use - Series No. 8000/B/2010
HOW TO USE
Upright
Reclined
35
Hide quick links:
Advertisement
Table of Contents
