Kyocera FS-1350DN Operation Manual page 85

Message
Format error
Memory card
KPDL error ##
Press GO
Load Cassette #
/
(A4) (PLAIN)
Load MP Tray
(A4) / (PLAIN)
Low security
Memory overflow
Press GO
MemoryCard err##
Press GO
MemoryCard err20
Missing
developer unit
No multi copies
Press GO
Original toner
installed
Paper jam
###############
6-6
Corrective Action
The CF card inserted in the printer is not formatted, and therefore cannot be read or written.
To format a CF card, follow the procedure in Memory Card (Using the memory card) section
in the Advanced Operation Guide.
Current print processing cannot continue because of occurrence of KPDL error which is
categorized by ##. To print out an error report, display >>Error Report from the menu
system, and select On. Press [GO] to resume printing. You can abandon printing by pressing
[Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed after a preset
period of time.
The paper cassette matching the paper size and paper type of the print job is empty. Load
paper into the paper cassette as displayed in place of #. Press [GO] to resume printing.
If you want to print from a different paper source, press
alternative? and you can change the source for paper feeding. After selecting a paper
source and pressing [MENU], Paper Settings > appears. By pressing the
type settings menu appears. After setting the correct paper type, press [OK] and printing
starts.
There is no paper cassette installed in the printer that matches the paper size and paper type
of the print job. Set paper in the MP tray. Press [GO] to resume printing. (Note that feeding
the paper having a paper size which does not match the current paper size from the MP tray
can cause paper jam.)
If you want to print from a different paper source, press
alternative? and you can change the source for paper feeding. After selecting a paper
source and pressing [MENU], Paper Settings > appears. By pressing the
type settings menu appears. After setting the correct paper type, press [OK] and printing
starts.
This message is displayed when Low was selected in Security Level.
The total amount of data received by the printer exceeds the printer's internal memory.
Try adding more memory. Press [GO] to resume printing. You can abandon printing by
pressing [Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed after a preset
period of time.
A CompactFlash (CF) card error has occurred. Look at the error code given in place of ##
and refer to CompactFlash (CF) Card and USB Flash Memory Errors on page 6-8. To ignore
the CF card error, press [GO].
The CompactFlash (CF) card is accidentally inserted and removed from the printer's slot
during the printer is on. Turn the power switch off and then back on again.
The developer unit is either not installed or incorrectly inserted. Insert the developer unit
securely.
Multiple copies cannot be printed because the RAM disk is disabled or the hard disk is not
installed. There is no available RAM disk or hard disk space. Delete unnecessary files. Press
[GO] to print error report.
Displayed when the installed toner is the original Kyocera product.
A paper jam has occurred. The location of the paper jam is indicated in place of the #'s. For
details, refer to Clearing Paper Jams on page 6-10.
to display Use
or
, the paper
to display Use
or
, the paper
Troubleshooting