Kyocera FS-1350DN Operation Manual page 114

Copies
Paper Source
? Cassette 1
Paper Source
? Cassette 2
>Remove Device ?
>Print
File List ?
Using the Operation Panel
Copies (Number of copies)
Sets the number of copies printed of the specified file in USB flash
memory.
1
While Copies in step 5 above is displayed, press
to display the number of copies. (E.g.: 10)
and
010
2
Press [OK]. Paper Source and a question mark (?) appears.
Paper Source (Selecting the paper feed source)
Sets the paper used for printing the specified file in USB flash memory.
1
While Paper Source in step 2 above is displayed, press
or and
(For example : Cassette 2)
Note that menus shown in the list may vary depending on which
optional units installed in the printer.
2
Press [OK]. The message Processing appears and the printer
prints a file stored in a USB flash memory.
Remove Device (Removing the USB flash memory)
Specifies the setting for USB flash memory removal.
1
while USB Memory > is displayed.
Press
2
Press or
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. Menu display ends and the USB flash memory
device can be removed.
Print File List (Printing a list of the files on a USB
flash memory)
This allows you to print a list of the files on a USB flash memory device.
1
while USB Memory > is displayed.
Press
2
Press or
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a list of files stored in a USB flash memory.
repeatedly until the paper source appears.
repeatedly until >Remove Device appears.
repeatedly until >Print File List appears.
and or
and
7-17