Reset And Restore Factory Default Settings - Tieline Merlin PLUS User Manual

162 Merlin PLUS Manual v1.2
2. Use the navigation buttons to select QoS and press the
3. Press the
use the numeric KEYPAD to enter the new setting recommended by your IT administrator.
4. Press the
Important Note: To ensure the continuous and regular flow of tagged data packets along
the path from point to point, all routers and switching equipment must respect the QoS
setting of the packets sent. Any bandwidth partitioning schemes should partition over a
small interval to ensure the codec jitter buffer does not empty and audio remains
continuous.
22.9

Reset and Restore Factory Default Settings

There are several options in the Reset menu which allow you to restore factory default settings
within the codec.
Function
1 Reset
'Connect' Settings
2 Restore
Defaults
3 Delete Programs &
Call History
4 Reboot Codec
Important Note: After restoring factory defaults, always reboot the codec using the
Reboot Codec function, not by removing power from the codec.
1. Press the SETTINGS
2. Use the navigation buttons to select Reset and press the
3. Navigate to the preferred option from those available and press the
4. Select Yes and press the
button and use the RETURN
button to save the new setting.
Description
Audio and Click to restore factory default settings for Audio and Connect
menu settings
Factory Click to restore factory default settings, excluding user defined
programs and call history
Deletes custom programs and recent calls in the codec; speed
dial contacts are retained
Click to restart the codec
button.
button to confirm the reset function.
button.
button to delete numbers already entered, then
button.
button.
© Tieline Pty. Ltd. 2014