Tieline Merlin PLUS User Manual page 106

106 Merlin PLUS Manual v1.2
8. Enter the IFB audio stream connection name in the text box and click Next
9. Configure the transport settings:
For IP click the drop-down Session Protocol menu and select Tieline Codecs and
ensure the Any check-box is not selected, then click Next.
Click to configure:
For ISDN settings are determined by ISDN module answering settings. For more details
see Configuring ISDN
10.After configuring all settings there are 2 options:
i. If you want to create another answering connection, select the check-box for Create
another answering connection and continue through the wizard.
ii. Click Save Program to save all program settings.
The newly created program will be displayed in the left pane within the Programs panel and in the
Master panel. This program will now allow incoming codec calls to establish 1 x Stereo Peer-to-
Peer + IFB connections and stream audio according to the input/output and port assignments
indicated at the beginning of this section.
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow
for Buffer Priority, or
Fixed Buffer Level and enter the Jitter Depth, which must be between 12ms and
5000ms depending on the algorithm you select.
Local and Remote FEC settings if required.
Answering.
.
© Tieline Pty. Ltd. 2014