Tieline Merlin PLUS User Manual page 105

It is also possible to select an Answer Route if required. This is useful when routing
multiple audio streams over transports like ISDN and is not recommended for use over IP.
See
connections.
4. Enter the connection name in the text box, then click Next
5. Configure the transport settings:
For IP click the drop-down Session Protocol menu and select Tieline Codecs and
ensure the Any check-box is not selected, then click Next.
Click to configure:
For ISDN, settings are determined by ISDN module answering settings. For more details
see
6. After configuring all settings there are 2 options:
7. Enter the IFB Audio Stream name and select Answer only, then click Next.
© Tieline Pty. Ltd. 2014
Configuring ISDN Answering
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow
for Buffer Priority, or
Fixed Buffer Level and enter the Jitter Depth, which must be between 12ms and
5000ms depending on the algorithm you select.
Local and Remote FEC settings if required.
Configuring ISDN Answering.
i. If you want to create another answering connection, select the check-box for Create
another answering connection and continue through the wizard.
ii. Click Next Stream to configure the IFB audio stream.
Merlin PLUS Manual v1.2
for more information. Use the default settings for IP
.
105