[Resize] Resizing And Trimming Images - Kyocera Finecam L4 Instruction Manual

Using Playback "p" Mode Functions

[RESIZE] Resizing and Trimming Images

You can change (resize) image dimensions and clip (trim) images. Since an image
that has been resized or trimmed is saved as a new image, it is possible to keep the
original image.
● Resized images are
recorded in the directory
as shown on the right.
● You cannot use this operation while the SD memory card is write-protected. For write protect,
see page 15.
● Files can be created under the name from [R00_0001jpg] to [R00_9999jpg] in the memory
card. You cannot resize more than 9999 images in this card.
To Resize an Image
1
Turn on the power and set the mode select dial to "p".
2
Press the MENU button to display the menu icons.
3
Press Left or Right on the directional keypad to
select [RESIZE], then press the e button.
4
Select [EXECUTE RESIZING], then press the e
button.
5
Press Left or Right on the directional keypad to
select the image, press Up on the directional key-
pad to select [OK], then press the e button.
6
Set the area to be resized.
When changing image
dimensions only
SELECT AREA
ZOOM AREA
CHANGE ARE
ENTER
72
DCIM
RESIZE
R00_0001.jpg
When enlarging the area
Press the e
button.
A new folder is created.
Resized image file
Press the " " button to
SELECT AREA
enlarge the image (2x or
4x magnification). Use the
directional keypad to set
ZOOM AREA
the area, then press the
CHANGE ARE
ENTER
e button.
RESIZE
RESIZE MENU
EXECUTE RESIZING
RESIZED IMAGE PLAYBACK
RETURN
SELECT RESIZE IMAGE
OK
CANCEL