Take A Picture - Kyocera Finecam L4 Instruction Manual

3
Check the exposure and bring the camera into focus.
When exposure and focus are not set:
4

Take a picture.

Lightly depress the shutter release button
halfway to set exposure and focus.
Pressing the shutter release button halfway
"Beep"
down (page 20.)
When exposure and the focus are properly set:
The electronic beep is heard and the standby
LED and focus mark come on.
DISP.
MENU
The standby LED and focus mark are flashing
and no electronic beep is heard.
● Repress the shutter release button halfway
● If the focus should improperly be set, the shut-
DISP.
MENU
Fully depress on the shutter release button to
take the picture; the shutter sound is heard and
recording of the image begins.
"Beep"
DISP.
MENU
When the standby LED goes off, the shoot-
ing is completed.
DISP.
down or use the focus lock to set exposure
and focus properly.
ter is released to take a picture.
Basic Operations
19