Preparation Of Camera; Loading The Memory Card And Inserting The Battery Pack - Kyocera Finecam L4 Instruction Manual

1
Loading the Memory Card and Inserting the Battery
Pack
1
2
Clipped
edge
3
Battery cover
release lever
4
5
2
14

Preparation of Camera

1
Open the memory card door.
Slide the memory card door and open it.
Insert the memory card.
Make sure the label side is toward the LCD monitor
side.
Slide in the card until it stops with a secure click.
● Do not attach a seal, etc. on the memory card.
If you do so, you may not be able to remove
the memory card.
Open the battery cover.
Put your finger on the battery pack cover release
lever and slide it to open the battery pack cover.
Insert the supplied lithium battery pack
(CR-V3).
Make sure of the direction of the + and - of the bat-
tery.
Close the card cover and the battery
cover.
1Close the card cover. (Then the battery pack cover
closes at the same time.)
2Slide the card cover and lock it.