Elation PRO FS 15R FOLLOWSPOT User Manual page 12

LAMP INSTALLATION PROCEDURE
1. Remove (3) screws marked "A", "B", and "C" on the rear cover plate (see image
below) and then remove the plate to access the lamp.
2. Carefully remove the (2) RED WIRES connected to the lamp base.
3. Gently remove the OLD lamp by grasping the ceramic socket base and twist the
lamp until it becomes free.
4. Once lamp becomes free, gently pull the lamp out.
w w w . e l a t i o n l i g h t i n g . c o m
12
PRO FS 15R FOLLOWSPOT™ User Manual Ver 1