What To Do First - Kyocera QCP 6035 User Manual

What to do first

To install the battery
The battery for your new phone is
delivered partially charged. Before
using the phone for the first time, you
must install and fully charge the battery.
1. With the phone turned off, use the
stylus or your finger to open the
battery compartment on the lower
back of the phone. Lift off the battery
compartment cover.
IMPORTANT: Do not remove the
circular access plug on the back of
your phone above the battery
compartment. Improper removal of this
service access plug can result in
permanent damage to the phone and
will void your warranty.
2. Slide the battery into the
compartment with the Kyocera label
facing you. The end of the battery
with four copper-colored depressions
goes toward the top of the phone.
What to do first
Open here.
Do NOT
remove
this plug.
3