Kyocera QCP 6035 User Manual page 47

Kyocera smartphone user's guide qcp 6035

Hide thumbs Also See for QCP 6035:

Table of Contents

To use Data/Fax mode

Open

1. Slide the phone into the cradle. If the cradle is attached to the port you

use for data synchronization, turn off HotSync on your computer. If

you are using a data cable and/or a different port than the one you use

for synchronization, it is not necessary to turn off HotSync.

2. Tap

to view the Applications Launcher.

3. Tap

to open Data/Fax mode.

You see status information beginning with "Initializing Modem" and

continuing to "Ready to Send Data or Faxes."

4. Tap the

beside Incoming Calls and select an option:

Voice

Fax, next call

Data, next call

5. From the computer, make the connection you want to initiate.

6. To end the data or fax call, tap End or tap the Applications Launcher

and select a different application.

See Chapter 11, "Setting Up Network Connections," in the Reference Guide.

Using Data/Fax mode

Fax, until off

Data, until off

Table of Contents