Table of Contents
Advertisement
1
G
ETTING
Installing the battery
Your Kyocera KX12 phone comes with a removable
lithium ion (LiIon) battery.
Fully charge the battery before using the phone.
To charge the battery see "Charging the battery" on
page 2. Only connect the charger as instructed.
To install the battery:
Place the phone face down with the battery
1.
recess toward you.
Place the battery in
2.
the phone recess with
the copper contacts
toward the bottom of the
phone (1). Press the
upper portion of the
battery into place (2).
Place the two tabs at the
3.
top of the rear cover into
the openings at the top
of the phone assembly.
Press the rear cover onto
the phone.
Close the port plug over
4.
the latch, charging jack,
and headset jack.
User Guide for the Kyocera KX12 Phone
S
TARTED
Removing the battery
Before you remove the battery, make sure
Warning:
the phone is powered off.
Open the port plug.
1.
Between the phone jacks,
2.
there is a latch to aid you
in opening the rear cover.
Pull the top of the latch
outward to release the
rear cover.
Pull the rear cover away to
3.
remove it from the phone.
Press the battery toward
4.
the bottom of the phone
and pull the battery out of
the recess.
1
Advertisement
Table of Contents
