Setting The Roam Ringer - Kyocera KX12 User Manual

–
On any change
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.

Setting the roam ringer

You can set a ringer to indicate when an incoming
call is subject to roaming charges.
→
• Select
Menu Settings
→
Roam Ringer Enabled
Setting Call Guard
You can set the phone to warn you before you
answer or place a call while roaming.
→
• Select
Menu Settings
→
Call Guard Call Prompt
– The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
– To accept or place a call while roaming,
you must press
Call Prompt is disabled when the phone is in
Note:
emergency mode.
Setting digital or analog mode
Depending on services available from Alltel, you
may set the phone to either digital or analog mode.
This is useful if you are in an area that borders on
digital service and the automatic feature is causing
the phone to keep switching between modes.
22
alerts you with three
→ →
Sounds
. You hear the ringer.
→
Convenience
.
.
Select
1. Menu
Digital/Analog
Select an option and press
2.
–
Automatic
between digital and analog.
–
Analog only
analog mode only.
–
Analog call
for the duration of the next call.
–
Digital only
mode only.
Turning roaming on or off
This setting allows you to control the phone's
→
roaming feature by specifying which signals the
phone will accept.
Select
1. Menu
Roam Option
Select an option and press
2.
–
Automatic
any system the phone service provides.
–
No roaming
or receiving calls outside of your home
service area.
If your phone has more than one
Note:
setting for Automatic, contact Alltel to determine
which one to use.
→ →
Settings Network
.
.
automatically switches the phone
sets the phone to work in
forces a call into analog mode
sets the phone to work in digital
→ →
Settings Network
.
.
(recommended setting) accepts
prevents you from making
Making and Answering Calls
→
→