Using The Speakerphone - Kyocera KX12 User Manual

• To answer the call, press
or press to select
If you accept the incoming call, you will
Note:
have one call active and another call on hold.
To toggle between the two calls, press
select .
Switch
Placing a call while in a call
When you are on a cellular or T2T call, you may
place another call of either type without ending the
first call. The new call becomes the active call, and
the original call is placed on hold.
While on the first call, press
1.
. Make selections to place a T2T or
Options
cellular call.
You cannot toggle between the two calls.
Note:
Ask the party on the new call to hang up when
2.
finished talking. Your phone then returns to
your original call.
Silencing an incoming call
• Press or
In the absence of voicemail, this feature
Note:
drops the call.
- or -
• Press to silence the call then press
to answer it.
Either action silences only the current call.
The next call will ring according to your settings.
16
to select
Answer
.
Ignore
to select
to silence the call.
Adjusting the volume during a call
• To adjust the earpiece volume during a call,
press

Using the speakerphone

to
Your Kyocera KX12 phone has a built-in
speakerphone that you can use during a call.
This function works only for the current call.
Note:
Once the call is ended, the speakerphone turns off
and the earpiece volume returns to normal.
Press
1.
call and turn on the speakerphone
simultaneously. "
the screen.
- or -
Press
time during a call.
To turn off the speakerphone, press
Setting the phone to hold calls
The Hold Call feature allows you to place incoming
calls on hold until you are ready to answer them.
Select
1. Menu
Hold Call
– If you have not recorded a hold message,
you will be prompted to record one, such as
"Please hold. I'll answer in a minute."
Record the message twice, as prompted.
2.
or up or down.
speakerphone key to answer the
Speaker is ON" displays on
to turn on the speakerphone at any
→ →
Settings Convenience
→
Enabled.
Making and Answering Calls
.
→