Setting Position Location - Kyocera KX12 User Manual

Connect the phone to the laptop or PC.
1.
Set the Com Port speed.
2.
→
Select
3. Menu Settings
.
Data/Fax Calls
Select an option and press
4.
– allows only voice calls.
Voice only
– or
Fax, next call
to fax mode or data mode for the next
incoming call or the next 10 minutes.
– or
Fax, until off
phone into fax or data mode until the phone
is turned off.
You cannot receive voice calls while the
Note:
phone is in data/fax mode or if you are on a
T2T call.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
Enable TTY only when using the phone with a
Note:
TTY device.
Connect the TTY device to the phone.
1.
Enter
2.
your keypad.
Press to select
3.
Press to select
4.
Highlight an option and press
5.
TTY/TDD service may not be available. Check
Note:
with Alltel for more information.
User Guide for the Kyocera KX12 Phone
→ →
Network
:
sets the phone
Data, next call
forces the
Data, until off
from
.
TTY
to clear the message.
OK
.

Setting position location

This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.) in
markets where service has been implemented.
This feature works only when your phone is
Note:
in digital mode. You do not have the option of
turning off the locator to emergency services.
→
Select
1. Menu Settings
.
Location
Select or
2. 911 Only
– (default) shares your position
911 Only
information only with emergency services
when you call your 3-digit emergency code
(911, 000, 111, etc.).
– shares your position information
Location On
with Alltel's network in addition to emergency
services.
→ →
Network
.
Location On
47