Using The Trigger Button; Sending A Monitor Image Via E-Mail; Sending A Monitor Image To An Ftp Server; Controlling Alarm Out 1 - Sony SNC-CH160 User Manual

Sony network camera user's guide
Hide thumbs Also See for SNC-CH160:
Table of Contents

Advertisement

Using the Trigger Button

You can execute various functions by clicking their
respective buttons on the Trigger panel.

Sending a monitor image via e-mail

You can send a captured still image by attaching it to an
e-mail.
To use this function, you need to make e-Mail (SMTP)
active and set the address in the Trigger menu of the
Administrator menu properly (page 75).
1
Click e-Mail (SMTP) on the Trigger panel.
The still image of the time you click is captured,
and your e-mail with the image file attached is sent
to the specified mail address.
Sending a monitor image to an FTP
server
You can send a captured still image to the FTP server.
To use this function, you need to make FTP active and
set the address in the Trigger menu of the Administrator
menu properly (page 76).
1
Click FTP client on the Trigger panel.
The still image of the time you click is captured,
and the image file is sent to the FTP server.

Controlling Alarm out 1

You can control Alarm out 1.
To use this function, you need to make Alarm out 1
active in the Trigger menu of the Administrator menu
(page 76).
1
Click Alarm out 1 on the Trigger panel.
The alarm output is switched by clicking.
The alarm output mode can be selected from
Toggle or Timer of Alarm out 1 in the Trigger
menu (page 76).
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.

Controlling the Day/Night function

You can set the Day/Night function to On (night mode)
and Off (day mode).
To use this function, you need to make Day/Night active
in the Trigger menu of the Administrator menu
(page 76).
1
Click Day/Night on the Trigger panel.
Each click switches the Day/Night function
alternately between On (night mode) and Off (day
mode).
Note
If Day/Night in the Trigger-Day/Night menu (page 76)
is set to Auto, you cannot control the Day/Night
function by clicking Day/Night.
27
Using the Trigger Button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents