Stay Time - Sony SNC-CH160 User Manual

On: The tour operates.
Off: The tour does not operate.
Note
If nothing is added to the Sequence list and you click
OK when On is selected, the tour function will fail.
Sequence
Set the sequence of the tour.
The preset positions saved using the Position tab are
displayed in Preset position list.
Select the preset position from Preset position list, then
click Add. The selected preset position is added in the
Sequence list. Repeat this procedure to specify the
preset positions in sequence.
To check a preset position, select it from Preset position
list, and then click Call.
To delete a preset position from Sequence, select it, and
then click Delete.
To change the order in Sequence, select the preset
position and then click Up or Down.
Speed
Select the speed of camera movement between 1 and 23,
or Fastest from the drop-down list. The camera moves
faster with a higher number setting. The fastest speed is
obtained with Fastest.

Stay time

Type a period of time during which the camera is to stay
at each preset position, between 1 and 3600 seconds.
Preview
Previews the order of movements of the selected tour.
The operation speed and stop time do not influence the
preview operation.
Stop
Stops the preview in action.
Effective period
Select the period during which the tour in activated.
Always: The tour can be activated any time.
Schedule: The tour is activated according to the
schedule you have set.
Click Schedule, and the menu for the effective
period is displayed. ("Setting the Schedule —
Schedule Menu" on page 77.)
Note
You cannot set tours if the effective periods overlap each
other.
OK/Cancel
See "Buttons common to every menu" on page 32.
Saving the Camera Position and Action — Preset position Menu
67